YSI:Format Options
From SA-MP Wiki
Contents |
format, formatex, printf, printfex and Text_SendFormat
These functions all create a string from other data, i.e. numbers and other strings, the difference is that printf displays this generated string in the server console, format saves the generated string in another string, Text_SendFormat sends the string to players for display. The ex versions support the extra YSI identifiers. These functions all use the same method of determining the types of passed parameters: the format string. An example of this is:
"Hello %s, the number is: %d"
% is the format identifier, it tells the system to do something special, not to display the character (to display a percent sign do: %%, all other characters not following a % and not related to it are displayed normally).
Symbols
The default symbols are:
| b | Binary value |
| c | Character |
| d | Integer |
| f | Floating point |
| h | Hex value |
| i | Integer |
| s | String |
| x | Hex value |
| % | Percent sign |
YSI also supports a further set of symbols in it's text system:
| o | Octal value |
| n | Command name |
| p | Numerical suffix |
| u | Unsigned variable base number |
| t | Signed variable base number |
So the above format string, in a full format function would be:
format(string, sizeof (string), "Hello %s, the number is %d", "Y_Less", 5);
If you were to them read the contents of the variable string you would see:
"Hello Y_Less, the number is 5"
Why?
The format processor reads through the format string, copying letters over to the destination string until it reaches a %. At this point it gets the type of format parameter, as determined by the next character and, using this type, gets the next parameter after the format string. When it reaches the second % it gets the second parameter after the format string and so on (3rd gets the 3rd, 4th 4th etc) (Note: %% does not increase the parameter counter as it doesn't use a parameter so the second % would get the first parameter if it was after the %% for example).
If you use the wrong parameter type you will get very strange values and possibly even crashes.
Symbols after the letter (or %) after a % are not considered part of it so:
format(string, sizeof (string), "%sss", "aa");
Would give:
"aass"
As there are two s's which are just normal text as they're after the s after the %.
An example of a printf statement:
printf("The value of floatVar is %f", floatVar);
The word floatVar appears twice in that strng but they are not the same. The first is in a string so will always read as floatVar but has no knowledge at all of the variable called floatVar (you could put: printf("The value of something is %f", floatVar); and it would do exactly the same thing (except for the name of the variable displayed, which is now "something")). floatVar, as implied by it's name, holds a float (a non-whole number such as 3.5 or 7.0 (which is whole but in float format)), from the table above we can see that the format code for displaying a float is f so we have used %f. The output of this line will look something like:
"The value of floatVar is 7.000000"
Precision
Now I don't know about you but I don't need to know the value of a number to the nearest millionth, it probably doesn't make much difference after a hundredth, possibly a thousandth for high accuracy things, so we can change this. In a format string % starts it and the letter identifier ends it, this means you can add additional information if you need:
printf("The value of floatVar is %.2f", floatVar);
This line will give:
"The value of floatVar is 7.00"
Which is a much nicer number to use. The %.2f means display a float number to 2 decimal places, %.4f would display it to 4 decimal places, %.0f would basically round it off to an integer, there would be no decimal part.
Width
The rounding is called precision, the other parameter on floats is the width, this allows you to pad out strings to a length for display purposes, e.g:
printf("Line 1: %.2f %.2f %.2f", length[0], width[0], height[0]); printf("Line 2: %.2f %.2f %.2f", length[1], width[1], height[1]); printf("Line 3: %.2f %.2f %.2f", length[2], width[2], height[2]);
Now lets say length, width and height are:
new length[3] = {1.5, 798.12, 34.2 }; new width[3] = {456.1293, 890.1, 439.565}; new height[3] = {2.0, 2.0, 2.0 };
These are all nicely lined up so you can see what goes together, however if you used the print statements above you would get:
"Line 1: 1.50 798.12 34.20" "Line 2: 456.12 890.10 439.00" "Line 3: 2.00 2.00 2.00"
It looks very very messy, you could adjust the spacing to line them up but you would need to adjust it for every different number. This is where widths come in. The longest number, including decimal point, is 6 characters in this example (remember they're trimmed to 2dp), this may be the highest they go or you may have longer numbers. Either way you need to find the longest length or number you will have and set that as your width. Incorporating this into the print statements gives us:
printf("Line 1: %6.2f %6.2f %6.2f", length[0], width[0], height[0]); printf("Line 2: %6.2f %6.2f %6.2f", length[1], width[1], height[1]); printf("Line 3: %6.2f %6.2f %6.2f", length[2], width[2], height[2]);
The maximum width goes before the decimal point in the float format identifier to identfy it as a width, not a precision (if you didn't have a set precision you would simply have %6f which is perfectly valid). This gives:
"Line 1: 1.50 798.12 34.20 " "Line 2: 456.12 890.10 439.00" "Line 3: 2.00 2.00 2.00 "
Which is obviously better lined up. Note that if you have a number longer than the max width it will show the whole number which may mess up your alignment. Basically width pads the number to the desired width if required.
Padding
Integers can also be padded, and you have more control over it. There are 3 options: length of padding, type of padding and location of padding. Length of padding is much like the float, a format identifier of %4d would pad the number to 4 spaces, however unlike floats by default the padding comes BEFORE the number, not after. The second option is type of padding, this can be either spaces, as is default, or zeros, identified by a leading 0 on the width (e.g. %04d). The final option is location of padding, either before (by default) or after (by negating the info value), so %-4d would pad the number to 4 spaces with the padding coming after the number. Examples:
printf("%d %i", 123, 7); // "123 7" printf("%2d %4i", 123, 7); // "123 7" printf("%4d %2i", 123, 7); // " 123 7" printf("%04d %-4i", 123, 7); // "0123 7 " printf("%-04d %04i", 123, 7); // "1230 0007"
Variable width and precision
The final thing with these basic identifier modifiers was added in SA:MP 0.2 after their inclusion in YSI and that's the * width and * precision. This takes a parameter as the width or precision instead of a set number. Note that you cannot set the location or type of the padding with *. Example:
printf("%.2f", 89.0); // "89.00" printf("%.*f", 2, 89.0); // "89.00" printf("%.*f", 4, 89.0); // "89.0000" printf("%*.2f", 7, 89.0); // "89.00 " printf("%*.*f", 7, 3, 89.0); // "89.000 " printf("%-0*d", 5, -12); // "-1200"
Note that the - on the -12 is one of the 5 characters.
Obviously this is very useful as the width/precision parameter can be a variable and thus alterable dynamically without multiple formats to generate a format string.
Width and precision can also be used on strings, width is as you'd expect - it pads strings to a minimum length with spaces (these are after the string as normal). Precision is a very useful but little known thing which allows you to define the length of string to take, this, combined with the fact that you can define the start point, means you can extract any portion of a string using only format. If you didn't know you can define the start point of a string using string[start] instead of just string as the parameter, although this is technically a cell the function wants a string so it's more like a pointer. Note: this doesn't apply to constant strings, only variables.
Examples
printf("%s", "Hello there"); // "Hello there"
new str0[] = "Hello there"; printf("%s", str0); // "Hello there"
new str1[] = "Hello there"; printf("%s", str1[6]); // "there"
printf("%.5s", "Hello there"); // "Hello"
printf("%15s", "Hello there"); // "Hello there "
printf("%15.5s", "Hello there"); // "Hello "
printf("%.*s", 2, "Hello"); // "He"
new str2[] = "Hello"; printf("%.*s", 2, str2[3]); // "lo"
new str3[] = "Hello"; printf("%.*s", 3, str3[2]); // "llo"
new str4[] = "Select some words"; printf("%9.4s", str4[7]); // "some "
new str5[] = "Select some words"; printf("%*.*s", 7, 5, str4[1]); // "elect "
Others
%c just gives a character, there are no options on it:
new str[] = "FEAR"; printf("%c", str[2]); // "A" printf("%c", 65); // "A" printf("%c", 'A'); // "A" printf("%c", '\65'); // "A" printf("%c", '\x41'); // "A"
%b, %h and %x behave the same as %d and %i just give different bases.
YSI identifiers
Octal
The YSI text functions have a few extra format identifiers for use when sending messages. First of these is %o, this is very similar to %b, %d, %h, %i and %x but in base 8 (aka octal), it's a mostly deprecated base but is still useful for bit shifting as:
data >> 010;
Shifts data right one byte. Octal numbers tend to be written with a leading 0 to distinguish them (and to state that they are base 8 in programming) but %o does not apply this so you're best of writing: 0%o (as you are writing 0x%x and 0b%b). %o has all the settings of the other numbers (zero/space padding) unfortunately this can't be used to apply the leading 0 as the number may be longer than the minimum length in which case the padding won't show up. Example (using the YSI function printfex):
printfex("0%o", 64); // 0100 printfex("0%o", 7); // 07 printfex("0%o", 8); // 010 printfex("0%o", 9); // 011
Baseless
Another two are optional base identifiers. They have the same modifiers as all the other numbers but no set base, the base is decided as the precision (default 10 if none specified or base negative). %t is a signed number to a specified base, %u is an unsigned number to a specified base:
printfex("%.3t", 9); // 9 in signed base 3, output: 100 printfex("%.3t", -1); // -1 in signed base 3, output: -1 printfex("%.3t", 1); // 1 in signed base 3, output: 1 printfex("%.3t", 7); // 7 in signed base 3, output: 21
printfex("%.3u", 9); // 9 in unsigned base 3, output: 100 printfex("%.3u", -1); // -1 in unsigned base 3, output: 121121222121102021010 printfex("%.3u", 1); // 1 in unsigned base 3, output: 1 printfex("%.3u", 7); // 7 in unsigned base 3, output: 21
printfex("%.10u", -1); // -1 in unsigned base 10, output: 4294967295
printfex("%-0*.*t", 7, 36, -100); // -100 in signed base 36, right zero padded to 7 characters, output: -2S00000
Postfixes
%p simply adds a suffix for the number passed (NOT for any previous numbers), i.e. st, nd, rd or th:
printfex("%d%p", 3, 3); // 3rd printfex("3%p", 7); // 3th printfex("%p", 21); // st
Again, there are no parameters for this, but it is useful for things like:
printfex("You came %d%p", position, position); // You came 4th
Commands
The final one introduced in YSI is %n. YSI has dynamic commands so doing:
printfex("/commands");
May be wrong as it may not be /commands, it may have been renamed, however "commands" is still it's internal identifier so we can use this:
printfex("/%n", "commands");
will now print whatever the commands command has been renamed (including prefix). %n has the same options as %s, assuming "/commands" has been renamed "/ysi list" for example:
printfex("%n", "commands"); // "ysi list" printfex("%.10n", "commands"); // "ysi list " printfex("%5n", "commands"); // "ysi l"
Functions
As shown in the examples in the YSI identifiers section two new functions were added to YSI: printfex and formatex, these simply work exactly the same as the regular printf and format functions but provide the additional format options from YSI.
There are also a number of text based format functions (e.g. Text_SendFormat) but these take a string identifier rather than a string and are documented here in more detail.
